Model NO.: T100 Anticorrosion Tape ,T100 Inner Tape: 0.5mm 0.635mm 0.76mm Thickness Specification: SGS DVGW EN23068 AWWA C209 C214 HS Code: 39191099 Material: HDPE Trademark: XUNDA Origin: Jining City, China Polyethylene Anti-corrosion Tapes (T 100) I Description: The T100 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines.The inner-layer tape shall be applied after the primer and before the outer-layer tape by hand or with a wrapping machineIIStructureThe specification of the tape consists of two layers, adhesive layer and film backingAdhesive: butyl rubber Outer layer: Special blend of stabilized polyethylene III FeaturesExcellent adhesion to pipe and selfResistant to UVCan be applied over a wide temperature range Good conformability and consistent uniform thickness Easily applied with no special equipmentCompatible with common pipe coatingsExcellent resistance to cathodic disbondingMeets ASTM D 1000 StandardCold applied IVTechnical datas: INNER WRAP TAPE: XUNDA-T 100 Series Type T-150 T-165 T-180 Total thickness 0.51 mm 0.65 mm 0.80 mm Polyethylene Film 0.31 mm 0.34 mm 0.39 mm Synthetic Adhesive 0.20 mm 0.31 mm 0.41 mm Elongation at Break ³ 400% Tensile Strength 60 N/cm 61.2 N/cm 63 N/cm Yield Strength 35.5 N/cm 42.3 N/cm 45.5 N/cm Peel Adhesion to Primed Pipe 21.2 N/cm 26.5 N/cm 33.2 N/cm Dielectric Strength 35 KV/mm 45.8 KV/mm 48 KV/mm Cathodic Disbandment 0.24 in radius 6.4 mm Volume Resistivity 2.5 x 1012 ohm.m Water Vapor Transmission Rate £ 0.1gm/M2/24h Water Absorption Rate < 0.06% Recommended Application Temperature -5 to +60ºC Max Serve Temperature -40 to + 80ºC Color Black Available Roll Size (width x length) 2" to 9" X 50 to800 feet
http://www.jnpipetape.com/anticorrosion-tape/