Single Circuit Power Poles
Type: Straight Pole, Tensile Pole, Turn Pole for power pole
Suit for Electricity distribution
Shape: Conoid, Multi-pyramidal, Columniform, polygonal or conical
Material: Q345B/A572, minimum yield strength>=345n/mm2
Q235B/A36, minimum yield strength>=235n/mm2
As well as Hot rolled coil from Q460, ASTM573 GR65, GR50, SS400, SS490, to ST52-
Tolerances of dimension: +- 2%
Power voltage: 10 KV ~550 KV
Safety Factor:
Safety factor for conducting wine: 8
Safety factor for grounding wine: 8
Design Load in Kg: 300~ 1000 Kg applied to 50cm from the top for power pole
Marks: Name plate through rivet or glue, engrave, emboss as per customer requirement
Surface treatment: Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required
Joint of Poles: Insert mode, inner flange mode, face to face joint mode
Design of pole: Against earthquake of 8 grade for power pole
Wind Speed: 160 Km/Hour. 30 m /s for power pole
Minimum yield strength: 355 mpa for power pole
Minimum ultimate tensile strength: 490 mpa for power pole
Max ultimate tensile strength: 620 mpa for power pole
Standard: ISO 9001 for power pole
Length of per section: Within 14m once forming without slip joint
Welding: We has past flaw testing.Internal and external double welding makes the welding beautiful in shape
Welding Standard: AWS ( American Welding Society ) D 1.1
Thickness: 1mm to 30 mm
Production Process
Raw material test → Cutting →Molding or bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →Calibration →Deburr→Galvanization or powder coating ,painting →Calibration →Thread →Packages
Packages
Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required , each 40HC or OT can loading how many pcs will calculation base on the client actually specification and data.China Power Transmission Poles manufacturers
website:
http://www.db-steel-tower.com/utility-structures/power-transmission-poles/