Shell and Tube Heat Exchangers, Pressure Vessels, Columns, Filter Dryers, Reactors and Complete Pre-Assembled Units The main products include titanium and titanium alloy, nickel and nickel alloy, aluminum, copper and stainless steel and other material from the heat interchanger, container, tower device,reaction kettle, condenser/condensator, Evaporator Crystallizer, and chemical using in the production of aluminum pipeline and standard accessories. In 1993 our company develops "60 square metres nickel heat interchanger" signed by the provincial, and gained second prize of national torch technology. The Company carried strictly suitable national standard, industry standard, it has passed national ISO 9001 quality management system certification in 2005 of the same trade . Shell and Tube Heat Exchangers, Pressure Vessels, Columns, Filter Dryers, Reactors and Complete Pre-Assembled Units Features: 1. Intensified Heat Transfer The spiral copper coil pipe is fixed by the cantilever construction. As the hot mediators(saturation steam or high-temperature water)pass the pipe, The pipe’s high-speed round trip motion causes perturbation motion of the water around the heat exchanger tubes forcedly, and this increases the heat transfer coefficient “K”, reduces the fluid‘s thermal resistance on the tubes outer wall “l/a0”, and enhances the total heat transfer coefficient.2. Less solid fouling Bcause of the coil pipe‘s float with high speed, the fouling will be deposited and adheres to the pipe’s outer wall difficultly during the operation process. At the same time, Even though there is a little fouling on the pipe’s outer wall, the fouling will break off automatically because the coil pipe will flex along with temperature change,therefore the traditional fouling-release technique is needless and the heat exchanger can keep the best work condition for long term.3. The accurate temperature controlThe heat exchanger is collocated with the high-accuracy “intellectualized temperature adjuster”, it can inspect the water temperature continuously and automatically and will instruct the controlling valves to regulate the flowing quantity of the hot mediator in the coil pipe, the outlet water temperature will be kept in the scope of ±2°C of the set point in the case that the charge is waving. 4. Less floor spaceThe exchanger has compact structure,so the floor space required is only 10 percent of the tubular heat exchanger that has the same function. The fabrication cost is reduced and space is utilized efficiently, it is also convenient for hoisting assembly and transportation.
https://www.wxmygroup.com/heat-exchange-equipment/