Automatic weighing, filling machine filling are used for larger doses of the items, according to the type of the material, can be divided into weighing type liquid filling machine, weighing type paste sauce filling machine, weighing type powder filling machine, weighing granule filling machine, today we mainly, and when we buy after automatic automatic weighing filling machine, how should we use and adjust.
A small class of filling machine mainly packaging machinery products, from the Angle to the packing of the material can be divided into liquid filling machine, paste filling machine, powder filling machine, granule filling machine. From the degree of automation of production is divided into semi-automatic weighing filling machine and automatic weighing filling production line. Below small make up to explain this using and maintenance of automatic filling machine details.
A, automatic filler filling accuracy of adjustment
1. Filling error produced mainly by filling amount, water filling machine filling speed, up and down the speed of valve to determine. Up and down the speed of valve associated with the viscosity of the product, the greater the viscosity, the slower the valve switching speed.
2. Adjust the spring pressure of the valve size should be through the test of measuring and filling operation personnel experience to determine.
3. Thick the switching speed of the main valve spring pressure adjustment valve. Spring pressure increases, the switching speed of the valve.
Second, automatic filling machine with automatic filling machine for liquid filling machine, work item for liquid, cannot be used for other purposes. In order to ensure production safety, pay attention to the following items:
1. This machine is of no power Settings, air for 4 to juice filling machine 6 kg is normal.
2. This unit may not be directly with water flushing the fuselage unpick and wash.
3. Note material lips appear overflow phenomenon, according to the urgent stop switch, safety guarantee workshop in order.
4. This machine of simple circuit, shall not be any pull plug.
5. When improper operation caused cylinder ejector can not return, please click this button to reset.
Three, automatic filling machine equipment maintenance
1. Automatic filling machine the machine body for stainless liquid bottle filling machine copper shell, please do not use hard, sharp edge tool scraping the surface.
2. When unpick and wash piston and to loosen the screw holding on at the same time, in order to avoid the hurt when the first impact to another process requirement.
3. Before the piston type filling machine cleaning, should be cleared within the remaining product, and then filled with soft cleaning fluid in the tank. It is recommended to use warm water. If you need to use soap and water, alcohol or other cleaning fluid.
4. The cylinder when the factory has good lubrication, please don't open or any lubricating oil.
