Geared motor (also called geared motor), is often used in packaging machinery, glass cutting machine, food machinery, automation equipment, etc. High efficiency of mechanization to produce the mechanical operation of the high strength, low treatment play acme, is also a company's choice inevitably.
In the gear reduction motor operation, caused by electrical energy into mechanical energy, there are also some of the electrical energy is converted into heat energy, causing electricity to heat, the industry is called the rise of temperature of the motor. 12 Volt Motor With Gearbox Under normal circumstances, at the mercy of the motor temperature value is 60 degrees, beyond 80 degrees for abnormal fever.
So in using the normal gear motor, should strengthen the protection of the motor is as follows:
1 and reducer to connect power to pump direction of rotation, clockwise for accurate.
2, adhere to the gear speed reducer cleaning, timely adjustment, tighten loose parts, to prevent the wear of aggravated due to loose parts or parts to lose.
3, pay attention to the work load period, the running-in period of the work load is usually don't exceed 85% of the additional work load, and to organize the work right, avoid the reducer long-term successive operation sight attack caused by overheating.
4, pay attention to investigation, often appear abnormal, should be swept away, to stop, was not found in the factors of trouble before cleaning, should be suspended operations.
5, the gear reducer after the period, deal with forced curing machine, High Torque 12v Dc Motor completes the check and adjust operation, with attention to replace the oil.
Worm gear reducer in order to improve the power, usually do non-ferrous metal was used for the worm gear, choose a hard steel, because it is sliding friction transmission, in the process of work, will attack high quantity of heat, decelerate machine the parts and seal, the onset of thermal expansion difference between in various cooperation side gap, thereby the oil due to the increase in temperature is thinning, easy to form leakage.
The primary factor four materials, one is whether reasonable, the second is on the surface of the mesh friction surface quality and the third is smooth oil selection, the increase is not accurate, four is the device quality and using environment.
Worm gear usually chooses tin bronze, worm pairs, the data usually use Vending Machine Motor 45 steel hardened to a 55 HRC45, also commonly used 40 c: hardened HRC50 55, via worm grinder grinding to roughness RaO. 8 FCM, the normal work of the speed reducer, the worm is like a hardening of the "file", constantly filing worm gear, worm attacks wear.
Generally speaking, the wear and tear slowly, like a plant some reducer can be used more than 10 years. If wear faster, will be thinking of type selection of reducer is accurate, have to work overtime and raw materials of worm gear and worm, gear quality or use environment and other factors.
