Original Title: Nine Kinds of Clothing Basic Sewing Operation Points Finishing Sewing is a very important process in the process of garment production, and different garment requirements need different sewing types to meet. To sum up, the basic sewing type can be roughly divided into: flat sewing, buckling sewing, inner wrapping sewing, outer wrapping sewing, coming and going sewing, sub-pressing sewing, sitting sewing, stuffy sewing and curling sewing. Next, clothing cloud education will explain the operation points of these sewing types! 1. Flat seam Key points of operation: place the two layers of fabric face to face, and stitch a line evenly on the reverse side according to the specified seam allowance. The width of seam allowance varies according to the thickness, tightness and location of the fabric, usually 0.8-1.2cm. 2. Buckling seam Key points of operation: First, iron the seam edge of the fabric according to the specified seam allowance button, then put it in the specified position, and put an open line of 0.1 cm on the hem. Expand the full text 3. Inner overlock Key points of operation: overlap the front sides of the two layers of pieces, the lower layer of pieces is 0.8cm more than the upper layer of pieces, turn the upper layer upside down, turn the seam 0.1 cm away from the side, fold the seam upside down, cover the raw edge, and turn the open line 0.6 cm on the front side. 4. Overlapping Key points of operation: the sewing method is the same as the inner overlock sewing. Different points: after the reverse sides of the garment pieces are oppositely overlapped with each other, the garment piece of the lower layer is 0.8cm more than the garment piece of the upper layer; and the upper layer is turned upside down. ? Stitch 0.1 cm from the sidecar, fold back the overlock seam to cover the raw edge, and stitch 0.1 cm of open line on the front. 5. Come and go sewing Key points of operation: ① Sewing: Overlap the reverse sides of the two layers of garment pieces, cut an open line 0.5cm away from the edge, and then trim the seam allowance to 0.3cm. ② Remove the seam: turn over the two pieces after sewing to form the opposite sides, buckle the sewing edge by hand, garment measuring tape , and then draw the second line 0.6 cm along the edge, so that the dander of the first sewing allowance can not be exposed. 6. Pressure dividing joint Key points of operation: fold the front of the two layers of garment opposite to each other, and tuck 1 cm along the edge; then separate the seam allowance to both sides. ? 1, Meiran Building, No.7, Yannan Road, Futian District, Shenzhen Tel: 0755-83696155. Want to study fashion design? Click "Read the full text" to enter the registration system and return to Sohu to see more Responsible Editor:. tape-measure.com